Bingham & Taylor Opens Western States Distribution Center
Las Vegas, NV. February 3, 2015. Gas and water distribution products leader Bingham & Taylor has announced the opening of a new warehouse and distribution center in Las Vegas. This important new facility enhances the company's ability to serve its fast-growing customer base in the 13 western states. "More specifically," says Western Region Director of Sales Mark DeLancellotti, "it allows Bingham & Taylor to provide its customers with product within 24-72 hours."
"Our sales in the western states are growing by double-digits," says John Marshall, Executive VP and General Manager. "This distribution center, along with our recent introduction of the Mark V valve box developed specifically for this market, show our strong commitment to our water and gas distribution customers in the western United States."
|The facility will be managed by James Logan, a logistics professional and Navy veteran with more than 30 years experience in warehouse management. "Las Vegas has become a western hub for manufacturers who are expanding, and for the utilities and distributors they serve," says Logan. "With the resources now in place, we believe we can provide customers with quality, reliable products made in the USA to support our customers."
Bingham & Taylor is North America's preeminent manufacturer and distributor of products for the gas and water distribution markets, including curb boxes, standard and heavy-traffic valve boxes, meter frames, covers, utility markers, cathodic protection test boxes and tools.
|James Logan, a Navy veteran with more than 30 years experience in logistics and warehouse management, will manage Bingham & Taylor's new Western States Warehouse Facility.
Bingham & Taylor headquarters: PO Box 939 Culpeper, VA 22701 (540) 825-8334
Western Distribution Center: 2875 N. Lamb Blvd. Las Vegas, NV 89115 (702) 749-8468 www.binghamandtaylor.com. Member: AGA, AWWA, NACE, AFS, CGA, WASDA
Valve Box "Sealed System" Reduces Valve Actuation Time, Prevents Contamination
December 12, 2012. Culpeper, VA. Bingham & Taylor, North America's preeminent manufacturer of meter and valve access and protection products for water and gas utilities, has introduced the Buffalo brand "No Vac" Valve Box Sealed System, an important time and cost-saving product.
The Sealed System consists of a Valve Box Stabilizer and a Debris Trap, which are available together, or separately. The Stabilizer has the highest versatility, fitting all round valve box bells and bases, for use with either cast iron or plastic valve boxes. It is highly effective in preventing the intrusion of dirt, backfill, or sand from below. Design features of the Stabilizer are proprietary and benefit utilities in three other important ways as well.
First, the patented design assures proper alignment of the valve box and protection of the valve. It also assures that all "down" force is transferred to the back filled area, rather than to the buried valve or pipe. It eliminates the need to "block up" the valve box.
The Debris Trap component of the Valve Box Sealed System was engineered to eliminate maintenance and service issues caused by debris intrusion through and around the valve box top over time. The unique Debris Trap design is also responsible for the system being "no vac" because it eliminates the need to vacuum out the box prior to actuating the valve. This task is cumbersome and time-consuming - and has been necessary until now.
While the Stabilizer part of the system eliminates contamination from below, the Debris Trap guards against dirt and other debris from the top - a perfect combination. The Debris Trap is designed to fit domestic and imported valve boxes, both plastic and cast iron. It is manufactured from utility grade ABS plastic - the ideal material for applications such as this that demand high surface hardness, rigidity, impact strength and overall toughness. In addition, ABS plastic has no aging qualities, so it is ideal for utility maintenance products.
The Bingham & Taylor "No Vac" Debris Traps are manufactured in yellow and black, and are both paintable and markable with standard indelible markers.
The products for the "No Vac" Valve Box Sealed System are proudly manufactured in the USA.
In addition to the Valve Box Sealed System, Bingham & Taylor manufactures and distributes a broad range of products for water and gas utilities, including both standard and custom curb boxes, valve boxes, meter frames, covers, line markers, utility tools and cathodic protection test boxes.
For more information, contact Bingham & Taylor, www.binghamandtaylor.com
PO Box 939 Culpeper, VA 22701 - Phone: 540-825-8334 - Fax: 540-825-2173
Member: AGA, AWWA, NACE, AFS, WASDA.
Bingham & Taylor is a Certified Women's Business Enterprise
Bingham & Taylor Expands Sales Department
February 12, 2013. Bingham & Taylor Corp, a leader in the manufacture and distribution of cast iron and plastic valve boxes and curb boxes, meter frames and covers, cathodic protection test boxes, line markers, utility tools and ancillary products, announces two additions to its sales department:
Mark deLancellotti is now Western United States Sales Manager, with responsibility for water and gas customers in CA, WA, OR, AZ, NM, MT, ID, WY, CO, NV, ND and SD.
Brad Washburn is now Northeastern United States Sales Manager, with responsibility for water industry customers throughout New England.
The company has made these additions in order to continue to provide first class service to its water and gas distribution customers throughout the United States and Canada. For more information, contact Bingham & Taylor, PO Box 939 Culpeper, VA 22701 - Phone: 540-825-8334 - Fax: 540-825-2173
Member: AGA, AWWA, NACE, AFS, WASDA